How do I set the day/night program my Mill Steel / Glass Panel Heater?

When programming a day or night setback on your Mill Steel / Glass Panel Heater, the program will be active from the time you set the program on your heater. This meaning if you want your heater temperature to lower at 07:30 am, for example, you need to program the heater at 07:30 am so the correct time is activated.

You only need to program your heater one time for day and one time for night. Day/night setback programs are active on the following days:

• Day setback function: Monday – Friday

*The day setback function is only active from Monday to Friday, you are not able to decide which days you want to program. The heaters have days labeled 1 = Monday, 2 = Tuesday, etc. so that when programming your heater you can indicate what day it is in order for the heater to follow the correct routine.

• Night setback function: Every night

Please note: If there is a power outage or you turn off the heater, the heater will forget the program and you need to repeat the activation procedure.

Consider the following day and night setback programming activation procedure examples:

• Day setback function to be active from 7:30 am to 2:30 pm. Desired temperature: 17 degrees Celsius.
• Night setback function to be active from 10:00 pm to 6:00 am. Desired temperature: 18 degrees Celsius.

Instruction for activating the day setback function:

At 7:30 am go to the heater and push the SUN symbol on the heater’s thermostat

• “d” will show in the display. Use the arrow buttons to specify what day it is when you are programming the heater (1 = Monday, 2 = Tuesday, etc). Confirm by pushing the function button (gear symbol).
• “C” will blink in the display. Use the arrows to select 17 as the desired setback temperature. Confirm by pushing the function button.
• “H” will blink in the display. Use the temperature dial to set the setback period to seven hours (meaning it will be active from 7:30 am to 2:30 pm). Confirm by pushing the function button.

The day setback function will be active from 7:30 am to 2:30 pm Monday to Friday. Setback temperature will be 17 degrees Celsius.

Instruction for activating the night setback function:

At 10 pm go to the heater and push the MOON symbol on the heater’s thermostat

• “C” will blink in the display. Use the arrows to select 18 as the desired setback temperature. Confirm by pushing the function button(gear symbol).
• “H” will blink in the display. Use the arrows to set the setback period to eight hours (meaning it will be active from 10 pm to 6 am). Confirm by pushing the function button.

The day setback function will be active from 10 pm to 6 am every day. Setback temperature will be 18 degrees Celsius.